CLICK YOUR WARNING LIGHT TO SEE WHAT IT MEANS!
This is a safety feature It means there is an issue with your airbag and airbag deployment! Bring it in to get it inspected by one of our certified technicians!
There’s a reason why this looks similar to the coolant temperature warning light. Careful! If this light is on, your transmission might be operating at a significantly higher temperature than is safe. Check your transmission fluid level as well as the engine coolant level.
If this symbol is lit, refill your washer fluid as soon as possible. Just pop the hood, find the reservoir, and add fluid. Be sure to fill the correct reservoir. Look for the symbol on the cap.
When the tire pressure monitoring system warning light illuminates and stays on, one or more tires has low tire pressure. Inflate tires to the recommended pressure per square inch (PSI). Low tire pressure can cause tires to wear out quicker and create dangerous driving conditions.
This symbol indicates that an exterior light on your vehicle is burnt out. A simple lamp replacement will take care of this problem. Review your vehicle’s owner’s manual for lamp size and how to access lamps in exterior lights.
If this light stays lit, it indicates loss of oil pressure. Immediately check oil level and pressure.
The importance of this light depends on the other vehicle warning lights. If this light is coupled by another light such as the ABS Light or Battery Charging Alert, have that specific issue taken care of. If no other lights come on with this one, have your mechanic run a diagnostic scanning tool to determine the problem.
The check gas cap light indicates that the gas cap is not tightened properly. If not addressed, quite often the Check Engine Light will also illuminate.
This symbol indicates that the vehicle's overdrive system has been manually turned off. Typically the overdrive system is controlled by an on/off switch.
Indicates that oil life has expired. The oil needs to be changed and reset. The reset procedure is listed in the owner's manual. Some vehicles require the use of special tools to reset the light.
Indicates Engine Computer has limited engine power output. The ECM has many levels of reduced power depending on what component has failed in its control system. Usually requires diagnosis with a professional scan tool.
If the symbol lights momentarily it may mean that the ignition switch is locked and will need the proper transponder-equipped key to re-start. If the symbol is visible when the vehicle is on, then it typically indicates a malfunction in the security system.
When lit, this symbol indicates that conditions are slippery and tire traction is low. Some vehicles incorporate the traction control warning with the ABS light, but others have a separate symbol for both.
A flashing security alert light often means something in the car’s anti-theft system wiring is failing. Have a mechanic check it out.
Indicates that a door (including hood and trunk) is not closed. Open and close all doors, including hood and trunk. If vehicle is left in this condition overnight it can drain the battery.